2000 Nissan Pathfinder Speaker Sizes

The 2000 Nissan Pathfinder factory audio system features specific location allocations. The a-pillar accommodates a 1 inch speaker size, while the front door panel and rear door panel support 6.5 inch speakers. Compatible types for replacement and upgrade include tweeter, midbass, and full-range.

Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.

Speaker Details by Location
Location Size Type Notes
A-Pillar 1 Tweeter
  • Requires panel disassembly
  • Professional installation recommended
  • Low replacement priority
  • Replacement difficulty: high
Front Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low

2000 Nissan Pathfinder Speaker Replacement Summary

3 total positions
2 easy to replace
1 high priority
1 professional only

Replacement difficulty:

Low: 2 Medium: 0 High: 1

Replacement priority:

High: 1 Medium: 1 Low: 1

2000 Nissan Pathfinder Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 2000 Nissan Pathfinder front and rear door panels accommodate 6.5 inch speakers, which can function as either midbass drivers or full-range units depending on the system configuration.
  • A-pillar locations support 1 inch tweeters, which typically handle high-frequency reproduction above the crossover point in a component speaker setup.
  • Replacing door panel speakers with aftermarket units may improve bass response and overall clarity, particularly if the factory speakers have deteriorated over time.
  • Component speaker systems could utilize the existing A-pillar tweeter locations paired with midbass drivers in the door panels for improved staging and frequency separation.
  • Full-range speakers in the door panels would operate without separate tweeters, consolidating the frequency range into a single driver per location.
  • The single DIN or double DIN radio compatibility suggests flexibility in head unit replacement, which could enhance amplification and signal processing capabilities.
  • Door panel speaker replacement tends to be prioritized over A-pillar modifications, as the 6.5 inch drivers handle the majority of audible frequencies.
  • Midbass drivers in the door locations would require separate high-frequency components, while full-range speakers would not necessarily need the A-pillar tweeters to function.