2017 Peugeot 2008 Speaker Sizes
The 2017 Peugeot 2008 speaker size chart provides factory audio system specifications for replacement or aftermarket upgrade purposes. Information covers locations including dashboard, front door panel, and rear door panel positions, detailing compatible speaker specifications for each mounting area within the vehicle audio system.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2017 Peugeot 2008 Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 2 Low: 0Additional Notes
- The dashboard location in the 2017 Peugeot 2008 accommodates a 1-inch tweeter, which is the smallest of the listed speaker positions and would typically handle high-frequency reproduction only.
- Both the front and rear door panel positions share the same 6.5-inch sizing, which may suggest a degree of interchangeability when sourcing replacement drivers for either location.
- The 6.5-inch door panel positions appear to support either midbass or full-range driver types, meaning the installation could lean toward dedicated midbass units as part of a component system, or full-range drivers for a simpler setup.
- A full-range driver at the door panel positions would likely handle a broader frequency response on its own, whereas a midbass driver would generally be paired with the dashboard tweeter for a more divided frequency arrangement.
- The rear door panel position sharing the same size and compatible types as the front may indicate that rear fill speakers could be sourced from the same driver family as the front, potentially keeping tonal consistency across the cabin.
- Given that the dashboard houses only a tweeter-compatible position, replacing or upgrading that location would be limited to high-frequency drivers, with the door panels carrying the responsibility for mid and lower frequency output.