2010 Scion tC Speaker Sizes

The 2010 Scion tC factory audio system utilizes front door panels that accept a 1 inch speaker size alongside a 6.5 inch unit, while rear side panels accommodate 6.5 inch units. Tweeter, midbass, and full-range driver options function as compatible speaker types for sound system replacement and audio upgrade procedures.

Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.

Speaker Details by Location
Location Size Type Notes
Front Door Panel 1 Tweeter
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Front Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Side Panel 6.5 Midbass / Full-Range
  • Requires trim removal
  • Medium replacement priority
  • Replacement difficulty: medium

2010 Scion tC Speaker Replacement Summary

3 total positions
2 easy to replace
2 high priority
0 professional only

Replacement difficulty:

Low: 2 Medium: 1 High: 0

Replacement priority:

High: 2 Medium: 0 Low: 1

2010 Scion tC Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 2010 Scion tC features a component-style speaker arrangement in the front doors, separating high frequencies through 1-inch tweeters from mid and low frequencies handled by 6.5-inch midbass or full-range drivers.
  • Both front and rear locations accommodate 6.5-inch speakers, which may allow for component system installation using midbass drivers or traditional full-range coaxial speakers depending on audio preferences.
  • The dedicated 1-inch tweeter position in the front door panels suggests factory provisions for higher-frequency reproduction, potentially allowing aftermarket component speakers to integrate without extensive modifications.
  • Single DIN or Double DIN head unit compatibility provides flexibility when upgrading the source unit, though radio replacement might be considered secondary to speaker upgrades given the factory speaker limitations typical of this period.
  • Front door speakers could be prioritized for replacement since they handle most of the audio spectrum and are positioned closer to occupants, with the 6.5-inch midbass drivers likely providing the most noticeable improvement in sound clarity and bass response.
  • Component speaker systems with separate tweeters and midbass drivers could utilize the existing mounting locations without requiring crossover relocations or tweeter mounting brackets if the factory positions are suitable.
  • The 6.5-inch rear speakers may serve primarily as fill speakers in typical installations, though their replacement could contribute to overall soundstage width and rear passenger audio quality.