2010 Scion xD Speaker Sizes
The 2010 Scion xD factory audio system locations include the front door panel, which can accommodate a 1 inch speaker size alongside a 6.5 inch unit, while the rear door panel will accept 6.5 inch speakers. Compatible speaker types for replacement and upgrade applications include tweeter, midbass, and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2010 Scion xD Speaker Replacement Summary
3
total positions
3
easy to replace
2
high priority
0
professional only
Replacement difficulty:
Low: 3 Medium: 0 High: 0Replacement priority:
High: 2 Medium: 1 Low: 02010 Scion xD Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2010 Scion xD features a component speaker setup in the front doors, with separate 1-inch tweeters and 6.5-inch midbass or full-range drivers located in the door panels.
- This factory configuration suggests an OEM component system design, where high frequencies are handled by dedicated tweeters while mid and low frequencies are reproduced by the larger 6.5-inch speakers.
- Both front and rear door panels accommodate 6.5-inch speakers, which indicates uniform sizing across all four doors for the main drivers.
- Replacing the factory speakers with aftermarket components could potentially improve clarity and frequency response, particularly if the replacements feature stronger magnets and lighter cone materials.
- The 1-inch tweeter location in the front door panels may allow for improved stereo imaging when upgraded, as dedicated high-frequency drivers can provide better dispersion characteristics than coaxial designs.
- For those considering speaker replacement, the front doors would typically receive priority due to the component setup and proximity to listeners in the front seats.
- The radio cavity accepts both single DIN and double DIN head units, which provides flexibility for integration with aftermarket amplifiers if additional power is desired for upgraded speakers.
- Full-range speakers could be installed in the 6.5-inch locations if a simpler two-way system is preferred over maintaining the separate tweeter configuration.