2012 Toyota Yaris Speaker Sizes
The 2012 Toyota Yaris speaker size chart provides factory specifications for all audio system locations. Information includes replacement speaker sizes for front door panel and rear door panel positions. Details cover factory speaker specifications to assist with aftermarket audio system upgrades and component installations.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2012 Toyota Yaris Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 1Replacement priority:
High: 1 Medium: 1 Low: 12012 Toyota Yaris Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2012 Toyota Yaris front and rear door panels accommodate 6.5 inch speakers that can function as either midbass drivers or full-range units, suggesting flexibility in component selection based on whether a separate tweeter is installed.
- The presence of 1 inch tweeter locations in the A-pillars indicates the factory audio system may use a component speaker setup separating high frequencies from the door-mounted drivers.
- Replacing the door panel speakers would likely be the primary focus for sound improvement, as these larger drivers handle the majority of the audible frequency spectrum compared to the smaller pillar-mounted tweeters.
- The identical 6.5 inch sizing for both front and rear door positions could simplify speaker selection if upgrading all four locations simultaneously.
- Using midbass-specific drivers in the doors would pair with the A-pillar tweeters for a component system, while full-range speakers could operate independently if the pillar locations remain stock or unused.
- The single DIN and double DIN radio compatibility suggests the head unit could be replaced with aftermarket options to support upgraded speakers with additional power or signal processing.
- Tweeter installations at 1 inch might require careful matching with aftermarket door speakers to maintain proper frequency crossover and imaging characteristics.