2013 Toyota Yaris Speaker Sizes
The 2013 Toyota Yaris factory audio system features an a-pillar location that accepts a 1 inch speaker size, while the front door panel and rear door panel accommodate 6.5 inch speakers. Compatible speaker types for a sound system replacement or audio upgrade include tweeter, midbass, and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2013 Toyota Yaris Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 1Replacement priority:
High: 1 Medium: 1 Low: 12013 Toyota Yaris Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panels in the 2013 Toyota Yaris may be prioritized for speaker replacement, as these locations typically contribute substantially to overall cabin audio quality and passenger listening experience.
- The 6.5 inch openings in both front and rear door panels allow for compatibility with either midbass drivers or full-range speakers, providing flexibility in component selection based on system design goals.
- The A-pillar locations accommodate 1 inch tweeters, which could handle higher frequency reproduction when paired with the door-mounted midbass drivers in a component speaker configuration.
- Full-range speakers installed in the door panel locations would reproduce both midrange and bass frequencies through a single driver, while a component setup separating tweeters and midbass units might offer enhanced frequency response.
- The 2013 Toyota Yaris radio opening accepts both single DIN and double DIN head units, potentially allowing for aftermarket receiver upgrades that could provide additional amplification or signal processing capabilities.
- Sound improvement may be noticeable when replacing factory speakers with aftermarket units that offer higher power handling, improved sensitivity ratings, or enhanced frequency response characteristics within the same size specifications.